1986 Mustang 3.8 Lx Typical Oil Pressure Gauge Reading

Mustang

05-ten FORD MUSTANG GT & SHELBY GT 500 1 1/two" 60 PSI FUEL Pressure Judge LIQUID FILLED WITH ADAPTER

$ 49.95

VMS Racing LIQUID FILLED 1 1/2" (38.1MM) O.D. mechanical 0-60 PSI fuel pressure gauge AND ADAPTER for the 2005-2010 Ford Mustang GT And Shelby GT500 with either the iv.6L or five.4L engines. This comes with the VMS Racing CNC machined barracks Aluminum hard anodized black fuel runway adapter for the 2005-2010 Mustangs with the V8 engines. The adapter has ii outlets so you tin can put the gauge on one side and a use the other side for a myriad of things like: for nitrous fuel feed, for a fuel pressure gauge sender for a guess that will be on the inside of the car etc... Judge can be used as a fuel pressure, oil pressure, air pressure etc... judge. Gauge will bolt on to a 1/8" NPT female person port. VMS engineers designed this judge to be the ULTIMATE liquid filled gauge for many reasons: 1- PERMANENTLY SEALED Unit of measurement: Dissimilar basically EVERY other ane i/2" in line approximate on the market, the VMS Racing gauge is permanently sealed, the plug tin can non exist removed and volition not leak. It does not have a removable safety plug on the dorsum, which always leaks and tin can be a fire hazard! Removable, leaky safety plugs are BAD Thought!two - NICKEL PLATED FOR CORROSION RESISTANCE: Nickel plating prevents corrosion of the gauge, will look great for years to come!3- VACUUM SEALED FOR Accurateness: Gauge is vacuum sealed so that it will exist minimally affected, or not affected at all by temperature changes. As you probably know, liquid filled gauges volition vary the reading depending on the temperature, considering of the expansion and contraction of the liquid inside the estimate. Since this gauge is vacuum sealed this issue is almost non-existent in these gauges!...

More details ➞

05-10 FORD MUSTANG GT & SHELBY GT500 FUEL OR NITROUS RAIL Pressure level Gauge ADAPTER // Part # FPGA0400

$ 22.95

VMS Racing CNC machined billet aluminum fuel or nitrous pressure level gauge adapter for :2005-2010 Ford Mustang GT and Shelby GT500 with either the 4.6L or 5.4L engines Just!Recommended for utilize when you Install a fuel pressure regulator, nitrous system, turbo kit or supercharger for a complete, accurate fuel delivery tuning organisation. Installs between the fuel rails and fuel pressure sensor. The adapter has 2 outlets so you can put a gauge on one side and a apply the other side for a myriad of things like: for nitrous fuel feed, for a fuel pressure approximate sender for a gauge that will exist on the inside of the car etc... Fabricated of Aircraft Quality CNC Billet Aluminum and so Hard Anodized for a Long Lasting finishGauge Adapter Includes : - Gauge adapter. - 2 Mounting bolts. - 2 Washers. - one O-Ring. - No installation instructions included - Professional installation recommended. ...

More details ➞

05-x MUSTANG 1 1/2" 100 PSI FUEL PRESSURE Gauge LIQUID FILLED WITH ADAPTER

$ 49.95

VMS Racing LIQUID FILLED 1 ane/two" (38.1MM) O.D. mechanical 0-100 PSI fuel pressure level estimate AND ADAPTER for the 2005-2010 Ford Mustang GT And Shelby GT500 with either the 4.6L or 5.4L engines. This comes with the VMS Racing CNC machined barracks Aluminum difficult anodized blackness fuel rails adapter for the 2005-2010 Mustangs with the V8 engines. The adapter has 2 outlets so you lot can put the gauge on one side and a use the other side for a myriad of things like: for nitrous fuel feed, for a fuel pressure gauge sender for a gauge that will be on the inside of the machine etc... Gauge tin be used as a fuel pressure, oil pressure, air pressure etc... approximate. Gauge will bolt on to a one/eight" NPT female port. VMS engineers designed this gauge to be the ULTIMATE liquid filled gauge for many reasons: 1- PERMANENTLY SEALED Unit: Unlike basically EVERY other 1 i/2" in line estimate on the market, the VMS Racing gauge is permanently sealed, the plug tin can not be removed and volition not leak. It does not have a removable rubber plug on the dorsum, which always leaks and can be a burn down risk! Removable, leaky condom plugs are BAD Thought!2 - NICKEL PLATED FOR CORROSION RESISTANCE: Nickel plating prevents corrosion of the estimate, will expect great for years to come!3- VACUUM SEALED FOR Accuracy: Gauge is vacuum sealed so that it will be minimally afflicted, or not affected at all by temperature changes. Every bit you probably know, liquid filled gauges volition vary the reading depending on the temperature, because of the expansion and contraction of the liquid inside the gauge. Since this gauge is vacuum sealed this effect is virtually non-real in these gauges!...

More details ➞

1/two-xx 112MM LONG CNC MACHINED BULLET STEEL LUG NUTS ANODIZED ALUMINUM CAP 46-17 JEEP CJ, TJ, WRANGLER 79-14 FORD MUSTANG // 16MM CAP Diameter 73MM CAP LENGTH PART # LGC001

$ 38.95

Do yous have to purchase an new set of those cheap Chinese aluminum fasten lug nuts every time yous take your wheels off as the strip? Are you afraid of taking you car to a store if they accept to remove the wheels as y'all know they will damage the aluminum lug nuts? Tin you lot really even see those tiny puny spikes?    True Spike comes to the rescue yet again with an innovative and great looking production!!! NO MORE STRIPPED LUG Basics!!! NO More than Ownership THE SAME LUG Nuts OVER AND OVER AGAIN!!! NO More than PUNY LITTLE SPIKES!!!    True Spike lug basics are a totally unique design, that accept multiple Patents Pending. The lower role of the lug nut associates is manufactured out of CNC Machined Forged Steel, and the threaded fasten is manufactured out of T6061 CNC Machined billet aluminum. The lug nuts are powder coated black and the spikes are hard anodized, for corrosion resistance and years of practiced looks. YOU Can TORQUE THESE LUG Basics TO FACTORY SPECIFICATION AND Beyond! THE CNC MACHINED FORGED STEEL LUG NUT WILL NOT STRIP, Ever!!! Besides THE Fasten, WHICH IS WHAT YOU SEE,  Volition NEVER Become SCRATCHED, Every bit IT NEVER TOUCHES THE SOCKET!!!    This is the highest quality, all-time looking, nigh unique lug nut you can buy!   Patent number: D792,200 Patent number: D786,056 Patent number: D793,217  ...

More details ➞

1/2-20 112MM LONG CNC MACHINED FORGED STEEL LUG NUTS ANODIZED ALUMINUM SPIRAL Fasten CAPS 46-19 JEEP CJ, TJ, WRANGLER 79-14 FORD MUSTANG // 25MM CAP Bore 73MM CAP LENGTH PART NUMBER LGC026

$ 54.95

These are 25MM wide spikes at the bottom where they run across the lug nut, they volition be a perfect friction match to the lug nuts sleeves as they are besides 25MM wide. These spike with the round lug nut sleeves will create a seamless expect on the lug nut, where you tin can not tell where the lug nut ends and where the spike starts, it will await similar a one piece unit.       Do you take to buy an new gear up of those cheap Chinese aluminum fasten lug basics every time you take your wheels off as the strip? Are you afraid of taking y'all machine to a store if they have to remove the wheels as y'all know they will damage the aluminum lug nuts? Tin can you really even see those tiny puny spikes?    VMS Racing comes to the rescue however over again with an innovative and great looking product!!! NO MORE STRIPPED LUG Basics!!! NO MORE Buying THE Same LUG NUTS OVER AND Once more!!! NO MORE PUNY Lilliputian SPIKES!!!    VMS lug nuts are a totally unique pattern, that have multiple Patents Pending. The lower office of the lug nut associates is manufactured out of CNC Machined Forged Steel, and the threaded fasten is manufactured out of T6061 CNC Machined barracks aluminum. The lug nuts are pulverisation coated blackness and the spikes are hard anodized, for corrosion resistance and years of good looks. YOU CAN TORQUE THESE LUG Basics TO FACTORY SPECIFICATION AND BEYOND! THE CNC MACHINED FORGED STEEL LUG NUT WILL Not STRIP, EVER!!! As well THE SPIKE, WHICH IS WHAT YOU Run into,  Volition NEVER Become SCRATCHED, As Information technology NEVER TOUCHES THE SOCKET!!!    This is the highest quality, best looking, most unique lug nut you can buy! ...

More details ➞

100 PSI Liquid Filled Fuel Pressure level Guess WITH Adapter i/xvi to 1/viii NPT adapter 86-95 Ford Mustang 5.0 GT COBRA

$ 29.95

VMS Racing LIQUID FILLED one i/two" (38.1MM) O.D. mechanical 0-100 PSI fuel force per unit area gauge AND ADAPTER for the 1986-1995 Ford Mustang v.0L. This comes with the fuel rail 1/8" NPT to i/16" NPT adapter that fits on the Schrader valve.. Judge reads from 0-100 psi. Gauge tin can be used as a fuel force per unit area, oil pressure, air pressure level etc... gauge. Gauge will commodities on to a 1/8" NPT female person port. VMS engineers designed this estimate to be the ULTIMATE liquid filled gauge for many reasons: 1- PERMANENTLY SEALED Unit of measurement: Unlike basically EVERY other 1 1/2" in line gauge on the market place, the VMS Racing gauge is permanently sealed, the plug can not be removed and will not leak. It does not have a removable rubber plug on the back, which e'er leaks and can be a burn down hazard! Removable, leaky condom plugs are BAD IDEA!two - NICKEL PLATED FOR CORROSION RESISTANCE: Nickel plating prevents corrosion of the judge, will await great for years to come!3- VACUUM SEALED FOR ACCURACY: Estimate is vacuum sealed then that information technology volition be minimally afflicted, or non afflicted at all past temperature changes. As you lot probably know, liquid filled gauges will vary the reading depending on the temperature, because of the expansion and contraction of the liquid within the gauge. Since this gauge is vacuum sealed this effect is almost non-real in these gauges!...

More details ➞

two (Ii) 96-98 FORD MUSTANG GT & COBRA 4.six HIGH OUTPUT IGNITION COIL PACKS // PART # 8241

$ 89.95

Two (2) VMS RACING PRO Serial REPLACEMENT coil packs for the 1996-1998 Ford Mustang GT and Mustang Cobra. They volition directly connect to the mill connectors and deliver xv%-20% more than spark free energy for improved power and performance.      Increased spark free energy and voltage, help ameliorate the combustion procedure of the fuel mixture to create an efficient fire. The issue are quicker starts, improved idle, improved throttle response, cleaner plugs, cleaner emissions plus increased high rpm performance!Replaces the following part number coils:F5OY12029B F5RZ12029A F5RZ12029C FSD718100 FD487 DG530 F1VU12029A2A F1VY12029A F37U12029AA F37Z12029A YS4U12029AA YS4Z12029AA ZZM018100 Other Function Number 4: F510 F5LU12029AA F5LY12029A F5OU12029AA F5OY12029A E8TZ12029A E9TF12029AA EE03A F1VU12029A1A DG449 DG454 DG457 DG458 DG460 DG461 E8TF12029AA 0297006700 19017116 88F12029A1A 928F12029CA DG435THIS Volition FIT FOLLOWING VEHICLES:1992-97 Ford Crown Victoria Ignition Scroll for V8 4.6L1997-99 Ford E150 Van Ignition Coil for V8 four.6L1997-99 Ford E250 Van Ignition Ringlet for V8 four.6L1997-99 Ford E350 Van Ignition Curlicue for V8 4.6L1997-99 Ford Trek Ignition Whorl for V8 4.6L1997-99 Ford F150 Truck Ignition Coil for V8 4.6L1997-99 Ford F250 Lite Duty Truck Ignition Scroll for V8 4.6L1996-98 Ford Mustang Cobra Ignition Coil for V8 4.6L1996-98 Ford Mustang Ignition Whorl for V8 four.6L 1994-97 Ford Thunderbird Ignition Ringlet for V8 four.6L1995-97 Lincoln Continental Ignition Coil for V8 iv.6L1993-96 Lincoln Mark VIII Ignition Scroll for V8 4.6L1991-98 Lincoln Town Auto Ignition Roll for V8 iv.6L1994-97 Mercury Cougar Ignition Coil for V8 iv.6L1992-97 Mercury Grand Marquis Ignition Coil for V8 4.6LSPECIFICATIONS:• Turns Ratio 85:1• Primary Resistance 55 ohms • Secondary Resistance 13.5K ohms• Inductance four.0 mH • Spark duration (mS) 1100 uS• Peak Electric current 140 mA• Maximum Voltage 40,000 Volts...

More details ➞

2005-2014 MUSTANG SHIFT KNOB BOOT Retainer ADAPTER Prune MANUAL GEAR SHIFTER 12X1.25 MM // Role # SK10085

$ xi.90

VMS Racing shift kicking adapter clip WITH set screw in T-6061 billet aluminum that will fit most 2005-2014 Ford Mustang with manual transmissions including the 2005-2009 Shelby Mustang (Will NOT FIT THE 2010-2014 SHELBY MUSTANG).               Don't limit your choice to only shift knobs with built-in boot retaining clips. From VMS Racing comes this billet aluminum shift boot retaining clip that allows you to hold the shift boot upwards independently on your shift knob. This allows the use of a wider diversity of shift knobs on your 2005-2014 Ford Mustang.              Another major reward is that you do not have to raise your shift knob with this boot retaining clip. Most of the shift boot adapter that are out there will brand your shift knob sit 1 to 2 inches HIGHER THAN STOCK! This will brand y'all shifts slower and less accurate. With this prune you can lower your shift knob equally far down every bit you can, and withal proceed your boot in place!               Shift boot adapter is made to Piece of work on Manual transmission vehicles Just.              VMS Racing shift boot adapters are manufactured of Aircraft Quality T-6061 Billet Aluminum, and then they are precision machined to exacting tolerances. After all the machining is done, the shift kick adapter is beautifully hard anodized, to ensure a long lasting finish, and to provide years of trouble gratuitous service and looks.  Features: • Made of CNC machined T-6061 Billet Aluminum. • Includes ready screw and allen key to set desired boot pinnacle. • Holds shifter boot up to allow the use of aftermarket shift knobs. • Like shooting fish in a barrel 5 minute install....

More details ➞

60 PSI Liquid Filled Fuel Force per unit area Estimate WITH Adapter 1/16 to 1/viii NPT adapter 86-95 Ford Mustang 5.0

$ 29.95

VMS Racing LIQUID FILLED ane 1/ii" (38.1MM) O.D. mechanical 0-60 PSI fuel pressure guess AND ADAPTER for the 1986-1995 Ford Mustang v.0L. This comes with the fuel rail 1/eight" NPT to 1/16" NPT adapter that fits on the Schrader valve.. Guess reads from 0-60 psi. Gauge can be used every bit a fuel pressure, oil pressure, air force per unit area etc... gauge. Gauge will bolt on to a 1/viii" NPT female person port. VMS engineers designed this gauge to be the ULTIMATE liquid filled gauge for many reasons: one- PERMANENTLY SEALED Unit: Different basically EVERY other i one/ii" in line gauge on the market, the VMS Racing gauge is permanently sealed, the plug tin can non be removed and will non leak. It does not accept a removable safe plug on the back, which ever leaks and can be a burn down run a risk! Removable, leaky rubber plugs are BAD IDEA!2 - NICKEL PLATED FOR CORROSION RESISTANCE: Nickel plating prevents corrosion of the judge, will look great for years to come!3- VACUUM SEALED FOR ACCURACY: Gauge is vacuum sealed so that it will be minimally affected, or non afflicted at all by temperature changes. As you probably know, liquid filled gauges will vary the reading depending on the temperature, considering of the expansion and wrinkle of the liquid inside the approximate. Since this approximate is vacuum sealed this issue is well-nigh non-existent in these gauges!...

More than details ➞

96-00 FORD MUSTANG V6 iii.8L BILLET ALUMINUM ENGINE OIL DIPSTICK HANDLE // PART # ODS002

$ 22.95

VMS Racing Barracks Aluminum Oil Dipstick handle with new Vitton o-rings for the 1996-2000 Ford Mustang with the 3.8L V6 only! The VMS Racing CNC Machined T6061 billet Aluminum oil dipstick handle will fit the 1996-2000 V6 three.8L Ford engines. It easily installs in minutes without the need of whatsoever specialty tools. Y'all merely slide out the retaining pin on the Ford plastic handle, using the included pivot removal tool, and install on the VMS handle using the new pin that is supplied with the kit. This is a swell piece for anyone looking to enhance the look of their engine compartment without spending a ton of money, it volition also match the VMS racing oil caps and other VMS billet accessories for the Ford engines. Yous can at present replace that ugly xanthous handle that is missing, broken, croaky or but plainly ugly.Features:• CNC Machined from T6061 Barracks Aluminum.• Hard anodized, for expert looks and lifelong protection.• Direct replacement fit.• Adds a custom look to your engine compartment.• Beautifully finished.• Easy to install....

More details ➞

99-15 FORD MUSTANG GT & GT500 Barracks ALUMINUM ENGINE OIL DIPSTICK HANDLE

$ 22.95

VMS Racing Billet Aluminum Oil Dipstick handle with new Vitton o-rings for the 1999-2015 Ford Mustang GT and Shelby GT500 Just! The VMS Racing CNC Machined T6061 barracks Aluminum oil dipstick handle will fit the 1999-2015 four.6L and five.4L Ford engines. It hands installs in minutes without the need of any specialty tools. Y'all only slide out the retaining pin on the Ford plastic handle, using the included pin removal tool, and install on the VMS handle using the new pin that is supplied with the kit. This is a slap-up slice for anyone looking to heighten the look of their engine compartment without spending a ton of money, it will as well match the VMS racing oil caps and other VMS billet accessories for the Ford engines. Yous can at present replace that ugly xanthous handle that is missing, broken, croaky or just apparently ugly.Features:• CNC Machined from T6061 Billet Aluminum.• Difficult anodized, for good looks and lifelong protection.• Direct replacement fit.• Adds a custom look to your engine compartment.• Beautifully finished.• Piece of cake to install....

More details ➞

ADAPTER Plumbing equipment 1/8" NPT FEMALE TO i/xvi" NPT Male person FOR 86-95 FORD MUSTANG 5.0 FUEL Rails

$ 10.95

VMS gauge adapter fitting 1/16" NPT Male person to i/8" NPT Female adapter for Ford fuel rail. This VMS gauge adapter will permit you to install a 1/8 NPT gauge, or a guess sender, straight to your 1986-1995 Ford Mustang 5.0 Fuel Rail. You just remove the Schrader valve that is on the fuel rail and install the VMS adapter and then install the gauge or gauge sender...

More details ➞

Barracks ALUMINUM 1965-1966 FORD MUSTANG DOOR LOCK PULLS CHROME PLATED or Blackness viii-32 THREAD PITCH // Role # DLH001

$ 24.95

The VMS Racing CNC Machined T6061 billet aluminum door lock pulls supervene upon the stock door lock pulls for a unique custom expect. Will brand you lot ride stand apart from the residuum! Comes with an 8-32 thread pitch. Bachelor in silver and black anodized finish, and also triple chrome plated. These fit the 1965 and 1966 Mustang, they probably fit other Ford vehicles.                                               SOLD As A PAIR(ii) Features: • CNC Machined from T6061 barracks aluminum. • Triple Chrome Plated, or anodized black or silver for skillful looks and lifelong protection. • Direct replacement fit. • 8-32 thread pitch. • Beautifully finished. • Piece of cake to install....

More details ➞

Billet ALUMINUM 1967-1970 FORD MUSTANG DOOR LOCK PULLS CHROME PLATED or BLACK 10-24 THREAD PITCH // Function # DLK002

$ 24.95

The VMS Racing CNC Machined T6061 billet aluminum door lock pulls replace the stock door lock pulls for a unique custom look. Will make y'all ride stand up apart from the remainder! Comes with an 10-24 thread pitch. Bachelor in silver and black anodized finish, and also triple chrome plated. These fit the 1967 and 1970 Mustang, they probably fit other Ford vehicles.                                               SOLD Every bit A PAIR(two) Features: • CNC Machined from T6061 billet aluminum. • Triple Chrome Plated, or anodized black or silver for practiced looks and lifelong protection. • Direct replacement fit. • 10-24 thread pitch. • Beautifully finished. • Piece of cake to install....

More details ➞

DRAG PACK STREET Drag RACE 5-STAR WHEELS 17x10 54 Showtime & 18X5 5X114.3 -12 OFFSET FOR 05-xiv S197 (NO BREMBO) 15-21 S550 FORD MUSTANG INCLUDING GT WITH Operation Parcel BREMBO BRAKES Black or POLISHED // Office # VWST014 & VWST013 or VWST027 & VWST028

$ 1,059.95

VMS Racing Street/Drag Race ii forepart and 2 rear V-Star 17x10 (54 beginning) & 18x5" 5X114.3 (-12 offset) wheels are currently available in black milling, or black milling with polished lip.  Front 18x5 wheel information:          This wheel was designed specifically for the S550 Mustangs to clear front brakes including the GT with the operation package Brembo brakes (will not fit the GT350). This wheel will fit the S197 Mustangs simply Only with the standard GT brakes, information technology will not fit with either the 4 or vi piston Brembo restriction packages. Rear 17x10 wheel information:       This wheel will fit both the S197 and S550 Mustangs EXCEPT the GT350 with no upshot.       VMS Racing Wheels are used past both professionals and the street crowd because of their superb quality and adroitness, long recognized by enthusiasts for their keen value and styling. VMS Racing wheels are one of today's about popular brands.                      Volition NOT FIT THE 2015-2020 GT350 MUSTANG! Features: - 18x5: twenty pounds each. - 17x10: 22 pounds each. - Bandage aluminum. - Consummate fix of four wheels. - This is a milled wheel, this is not a painted wheel. - Center bore: 73.1MM - Street legal: VIA and JLL approved....

More than details ➞

Front BIG Brake KIT two PIECE 14" (355MM) ROTORS WITH four PISTON CALIPERS FOR 2015-2021 S550 FORD MUSTANG ECOBOOST V6 GT // PART # BBK001RD

$ 1,495.00

VMS Racing Ruby fourteen" 2 Piece Slotted Rotor Front Big Brake Kit for 2015-2021 V6, EcoBoost, and GT Mustangs. Are you looking for a racing-mode track ready braking system, with a light weight 2 piece rotor, with unmatched stopping power for your 2015-2021 V6/ EcoBoost/ GT Mustang that is truly affordable? There is no demand to look whatsoever farther as VMS Racing has come out with an all-new Red fourteen" Slotted 2 Piece Rotor Front Big Brake Kit. Every kit comes with high temperature, high friction race compound pads, and premium class fasteners. Features and Benefits: - Provides Better Braking Adequacy - Red Pulverisation Coated 4-Piston Front end Calipers - Race Manner Brake Kit - Rail ready - 14" 2 Piece Light Weight Slotted Rotor with Aluminum Hat - Aluminum Rotor Lid - Can salve upward to 6 pounds over your stock rotor - Bolt-on-installation Rotors mount to the hubs with forged aluminum hats, and radial mount brackets secure the caliper to the spindle in the OE location without modification. Reuses your stock brake lines.  Specifications: - Spindle Type: Manufactory Disc Spindles - Mountain Type: Radial - Caliper Blazon: 4-Piston Cherry-red Powder Coated Calipers  - Rotor Diameter: 14" - Min Wheel Bore Required: 18" Vehicle Fitment: -2015-2021 V6/ EcoBoost/ GT Mustangs Please Note: We recommend using an 18" or larger wheels with this 14" front brake kit to ensure proper clearance...

More than details ➞

FRONT Elevate RACE 5 LUG MODULO Cycle 15x3.5 5X114.iii (5x4.5") -13 Kickoff (1.75" BACKSPACING) FORD MUSTANGS/Muscle CARS PLYMOUTH/Dodge Muscle CARS // Function # VWMO011

$ 199.95

VMS Racing Modulo 5x114.3 (5x4.5") 15x3.5" with -13 offset (1.75" backspacing) wheel is currently only bachelor in black milling.        VMS Racing Wheels are used by both professionals and the street crowd because of their superb quality and adroitness, long recognized by enthusiasts for their great value and styling. VMS Racing wheels are one of today's nearly popular brands. Fitment: - Ford/Mercury Muscle Car era cars with 5x4.5" bolt pattern. Mustang, Fairlane, Torino, Cougar etc... Will fit some modern Fords, like most Fox Body Mustangs with 5 lug conversions, but a lot of the late model cars have front rotors and calipers that are style likewise big for a 15" wheel. - Contrivance/Plymouth Muscle Motorcar era cars with 5x4.5" commodities pattern. Roadrunner, GTX, Charger, Challenger, Barracuda, Cuda, Satellite, Belvedere etc...    Features: - 11 pounds each. - Cast aluminum. - Sold each. - This is a milled cycle, this is not a painted wheel. - Center bore: 73.1 MM - Street legal: VIA and JLL approved....

More details ➞

Front end Elevate RACE Five-STAR iv LUG Cycle 15X3.v 4X108/4x114.three -13 OFFSET (i.75 BACKSPACING) FOR Pull a fast one on Torso 1979-1993 FORD MUSTANG GT/Threescore v.0 and OTHERS // PART # VWST053

$ 199.95

VMS Racing Drag Race 5-Star 15X3.5" 4 lug wheel is currently just available in black milling. Can be used on certain vehicles as a rear drag bike too. This wheel was specifically designed for the 1979-1993 Fox Torso Mustangs. It has a non-tapering 73.1mm center bore, and a special center cap to clear the brake rotor on those cars.       VMS Racing Wheels are used by both professionals and the street crowd considering of their superb quality and craftsmanship, long recognized by enthusiasts for their great value and styling. VMS Racing wheels are 1 of today'due south most popular brands. Features: - xi pounds each. - Cast aluminum. - Sold each. - This is a milled wheel, this is not a painted wheel. - Center bore: 73.1MM - Street legal, VIA and JLL approved....

More details ➞

MODULO MACHINED BILLET SHIFT KNOB FOR HONDA Borough ACURA INTEGRA FORD MUSTANG CHEVY CAMARO NISSAN TOYOTA UNIVERSAL 6 DIFFERENT THREAD PATTERNS MANUAL AND SOME Automatic TRANSMISSIONS

$ 49.95

Modulo machined billet aluminum shift knobs, are the latest shift knobs from VMS Racing. Combining the modernistic machined billet aluminum expect with the pop matte anodized end, and a universal Direct Screw IN FIT.             These shift knobs are manufactured of Aircraft Quality T-6061 Billet Aluminum, and then they are precision machined to exacting tolerances. Later all the machining is washed, the shift knob is matte anodized and so final machined for the incredible two tone machined look that these shift knobs take. Look at the photos, the finish looks amazing!            Each shift knob includes 6 screw in adapter for utilize on nigh whatsoever vehicle with a manual transmission, or an automatic transmission that uses the popular 8x1.25MM Thread.             Available in 3 different styles, the short, the long, and the round Teardrop version.            The long and short versions come up with shift 4 different shift patterns that will lucifer most transmission transmission vehicles, look at the photos.           When installing the shift knob you just discover the right adapter for you shifter, you screw correct adapter into the shift knob and then simply screw in the shift knob to your shifter. There is no need for a locking nut, as the terminal thing you volition exercise is to put the shift pattern emblem on the knob after information technology it completely tightened down, so your shift pattern will e'er finish up straight.                                 Shifter thread size chart, click here FEATURES: • CNC Machined from T6061 billet aluminum, and so beautifully anodized, and so final machined and clear coated.• Directly bolt-on with no modifications required.• half dozen adapters included. • 4 different shift pattern emblems, for 5 and 6 speed vehicles, for the long and short versions are included.• Look at the photos, finest quality shift knob available.• Like shooting fish in a barrel to install. ADAPTERS INCLUDED: • 10X1.5 MM • 10X1.25 MM • 12X1.25 MM • 16X1.5 MM • 8X1.25 MM • 12X1.75 MM SPECIFICATIONS MODULO SHORT: • Length: iii inches. • Diameter: 1.five inches. • Weight: 6 ounces SPECIFICATIONS MODULO LONG: • Length: 5 inches. • Diameter: 1.5 inches. • Weight: ix ounces SPECIFICATIONS MODULO TEARDROP: • Length: 3.5 inches. • Diameter: ii inches. • Weight: eight ounces...

More details ➞

POLISHED THROTTLE Body 75MM 75 MM 96-04 FORD MUSTANG GT 4.6L SOHC Direct FIT

$ 68.95

VMS RACING DIRECT FIT POLISHED 75MM 1996-2004 Ford Mustang iv.6L SOHC 2 Valve Throttle Body. VMS Racing is proud to innovate its brand new POLISHED 75MM Street/Strip Series Racing Throttle Body for 96-04 Ford Mustang with the 4.6L SOHC 2 Valve engines (will not fit the F150 trucks or the DOHC Cobra engines). These throttle bodies are cast, simply like the original OEM Ford throttle bodies, they are finished machined using the latest in CNC machines in an ISO 9001 certified factory. This throttle body fits only similar an OEM throttle trunk. VMS Racing'south 75MM Street/Strip Series Throttle Torso is designed to exist used with aftermarket intake manifolds equally well as your OEM intake manifold for like shooting fish in a barrel bolt-on horsepower and torque gains by maximizing your engines airflow. Each VMS Racing throttle body doesn't just provide more airflow, they also retain smooth bulldoze-ability and OEM throttle characteristics. Each VMS Street/Strip Throttle Body is designed using the latest CAD/CAM (Computer Aided Pattern/Computer Aided Manufacturing) equipment, which results in a unit that exceeds OEM standards. VMS Street/Strip Throttle Bodies are cast using the latest in sand molding technology and so CNC finished machined. Later all the machining is done they are beautifully polished. The VMS Throttle Body reuses the stock TPS sensor. Throttle Body is uniform with your OEM throttle cable, which volition simplify your installation. They as well feature sealed bearings for polish functioning. A new reusable throttle body gasket and new stainless steel hardware is included for a problem-free install. A larger throttle torso is key to producing additional power on modified engines that take increased airflow demands. VMS'southward Street/Strip Throttle Bodies for the Ford 4.6L SOHC 2V engines feature a large, 75MM diameter, which results in significant horsepower gains on modified naturally aspirated applications, and even more on forced induction ones. Specifications: • OEM style casting, using the latest in sand molding technology and CNC machine finished and the beautifully polished, increases horsepower and torque. • CNC Machined to .001 Tolerances. • Straight FIT. Uses stock throttle cables and TPS sensors. Fits the following vehicles: • 1996-2004 Ford Mustangs with the 4.6L SOHC 2 Valve engines. WILL Not FIT THE COBRA DOHC ENGINES OR THE F150'S!...

More details ➞

REAR UPPER AND LOWER TUBULAR Command ARMS 79-04 FORD MUSTANG & REPLACEMENT BUSHING KIT// Part NUMBER 100.9862

$ 104.95

complete set up of BLACK VMS Racing CNC Machined 12 approximate tubular High-carbon steel (ASTM 304) REAR control artillery for your 1979-2004 Ford Mustang. Includes both upper and lower command arms, Delrin bushings and all bolts and nuts. Volition NOT FIT THE 1999-2004 Mustang Cobra with the contained rear suspension!!VMS Racing's CNC Machined High-Carbon steel (ASTM 304) tubular control arms are robotically precision welded and then hard powder coated, making them more resistant to chipping, rust, and corrosion than about other aftermarket command arms currently available.The VMS Racing Control arms come with high functioning 75A Delrin bushings, that are much stiffer than the soft OEM bushings, which many aftermarket command arms kits come with, and will even outperform the popular polyurethane bushings.With the VMS Racing complete rear control arm kit, you lot will discover a decrease in wheel hop, enhanced directly line traction and an improvement in your handling by eliminating the flex, common with stock control arms and bushings.This kit is a bolt on kit, it does not require any cut or welding, making for an easy commodities on installation....

More details ➞

STREET Drag RACE Front V-STAR Wheel 18X5 5X114.3 -12 OFFSET (ii.5 INCH BACKSPACING) FOR 2005-2014 S197 (NO BREMBOS) & S550 FORD MUSTANG INCLUDING THE GT WITH PERFORMANCE PACKAGE BREMBO BRAKES BLACK OR POLSHED // PART # VWST014 or VWST028

$ 274.95

VMS Racing Street/Drag Race V-Star front end 18X5" 5X114.3 with -12 offset bicycle is currently available in black milling, or blackness milling with a polished lip. This bicycle was designed specifically for the S550 Mustangs (2015 to present) to clear front brakes including the GT with the operation packet Brembo brakes. This wheel will fit the S197 (2005-2014) Mustangs but ONLY with the standard GT brakes, it will not fit with either the 4 or half dozen piston Brembo brake packages. Nosotros also have a 17x10 rear bicycle also specifically made for the S550 and S197 Mustangs.        VMS Racing Wheels are used past both professionals and the street crowd because of their superb quality and craftsmanship, long recognized by enthusiasts for their bang-up value and styling. VMS Racing wheels are ane of today'southward nearly popular brands.               Volition NOT FIT THE 2015-2020 GT350 or 2020 GT500 MUSTANG! Features: - 20 pounds each. - Cast aluminum. - Sold each. - This is a milled bike, this is not a painted cycle. - Center bore: 73.1MM - Street legal: VIA and JLL approved....

More than details ➞

STREET Elevate RACE 5-STAR REAR Wheel 17x10 5X114.3 54 Starting time FOR 2005-2020 S197 & S550 FORD MUSTANG INCLUDING THE GT WITH PERFORMANCE Packet BREMBO BRAKES BLACK OR POLISHED // PART # VWST013 VWST027

$ 274.95

VMS Racing Street/Elevate Race V-Star 17x10" 5X114.three with 54 offset bicycle is currently available in black milling, or black milling with polished lip. This wheel fits slap-up on the S197 and S550 Mustangs. We also take a 18x5 front wheel also specifically made for the S550 Mustangs to clear the performance package Brembo front brakes.        VMS Racing Wheels are used by both professionals and the street crowd considering of their superb quality and craftsmanship, long recognized past enthusiasts for their not bad value and styling. VMS Racing wheels are one of today's most popular brands.                          Volition Non FIT THE 2015-2020 GT350 MUSTANG! Features: - 22 pounds each. - Cast aluminum. - Sold each. - This is a milled wheel, this is not a painted wheel. - Center bore: 73.1MM - Street legal: VIA and JLL approved....

More details ➞

STREET Drag RACE 5-STAR Wheel 18x9.5 35 OFFSET (half-dozen.5 BACKSPACING) 5x114.3 (5x4.five) FITS FRONT OR REAR 15-21 S550 MUSTANG & 05-xiv MUSTANG WITHOUT BREMBO'S // Role # VWST038

$ 299.95

VMS Racing Street/Drag Race V-Star 18x9.5" 5x114.3 (5X4.5) with 35 starting time (6.five backspace) bike is currently simply available in black milling.            Volition fit the S197 2005-2014 Ford Mustangs WITHOUT the Brembo brakes.           Will fit the S550 2015-2021 Ford Mustangs including the GT with the Brembo brakes, only Will Non FIT the GT350's or the GT500's.           VMS Racing Wheels are used by both professionals and the street crowd because of their superb quality and craftsmanship, long recognized by enthusiasts for their great value and styling. VMS Racing wheels are ane of today's most popular brands.                                        FITS 2011-2021 Honda Civic Features: - 24 pounds each. - Cast aluminum. - Sold each. - This is a milled wheel, this is not a painted cycle. - Center bore: 73.1MM - Street legal: VIA and JLL approved....

More than details ➞

STREET DRAG RACE V-STAR Bicycle 18x9.5 40 OFFSET (6.75 BACKSPACING) 5x114.3 (5x4.v) FITS Forepart OR REAR fifteen-21 S550 MUSTANG & 05-14 MUSTANG WITHOUT BREMBO'Due south // Part # VWST043

$ 299.95

VMS Racing Street/Drag Race Five-Star 18x9.5" 5x114.iii (5X4.v) with twoscore offset (6.75 backspace) bike is currently only available in blackness milling.            Will fit the S197 2005-2014 Ford Mustangs WITHOUT the Brembo brakes.           Will fit the S550 2015-2021 Ford Mustangs including the GT with the Brembo brakes, merely Volition NOT FIT the GT350's or the GT500's.           VMS Racing Wheels are used past both professionals and the street crowd because of their superb quality and adroitness, long recognized by enthusiasts for their groovy value and styling. VMS Racing wheels are i of today's nearly popular brands.                                       FITS 2011-2021 Honda Civic Features: - 24 pounds each. - Cast aluminum. - Sold each. - This is a milled wheel, this is not a painted wheel. - Heart bore: 73.1MM - Street legal: VIA and JLL approved....

More details ➞

STREET OR DRAG RACE four LUG MODULO Wheel 15x10 DUAL BOLT PATTERN 4X100 4X108 20 OFFSET (6.3" BACKSPACING) 1979-1993 Fox Torso FORD MUSTANG AND OTHERS// PART # VWMO013

$ 184.95

VMS Racing Modulo dual 4 lug bolt design 4x100 and 4x108 15x10" 20mm offset (6.3" of backspacing) wheel is currently simply bachelor in black milling.        VMS Racing Wheels are used by both professionals and the street crowd because of their superb quality and craftsmanship, long recognized by enthusiasts for their great value and styling. VMS Racing wheels are one of today's well-nigh popular brands. Fitment: - 1979-1993 Fox Torso Mustang 15x10 with 6.iii" backspacing. Small mods may exist necessary, such as removing the quad shocks. This wheel was made with a vi.3" BS every bit opposed to a six.v" BS to assistance the Trick Body guys. Usually a 6.5" wheel with a 275-50/R15 tire will touch the inner cycle wells which volition demand to exist pounded in. Most people volition put a 1/4" spacer and so the tire does not hit the fender. We basically changed the BS so y'all do not demand to use a spacer, you may nevertheless need to do very minimal pounding on the bicycle well depending on the specific tire. Smaller tires than a 275 make fitting much easier.   Features: - xviii.5 pounds each. - Cast aluminum. - Sold each. - This is a milled wheel, this is not a painted wheel. - Center bore: 73.1MM - Street legal: VIA and JLL canonical....

More details ➞

STREET OR Drag RACE 5 LUG MODULO WHEEL 15x10 5X114.iii (5x4.5") twenty OFFSET (vi.three" BACKSPACING) or fifty Beginning (7.5" BACKSPACING) Play tricks Body/SN95 MUSTANG // Office # VWMO014 or VWMO017

$ 184.95

VMS Racing Modulo 5x114.three (5x4.5") 15x10" cycle is currently merely available in black milling. You can get either a 20mm beginning (6.iii" of backspacing) or a 50mm starting time (7.five" backspacing).       VMS Racing Wheels are used by both professionals and the street crowd because of their superb quality and craftsmanship, long recognized past enthusiasts for their great value and styling. VMS Racing wheels are ane of today's almost pop brands. Fitment: - 1996-2004 Ford Mustang with live axle will use 15x10 with vi.5" backspacing. Everything should articulate. - 1979-1993 Play a trick on Body Mustang with 5 lug conversion will use 15x10 with 6.iii" backspacing. Minor mods may be necessary, such as removing the quad shocks. This bike was fabricated with a half-dozen.iii" BS as opposed to a half dozen.v" BS to help the Trick Body guys. Normally a 6.5" bicycle with a 275-50/R15 tire volition bear on the inner wheel wells which will need to be pounded in. Most people volition put a 1/4" spacer then the tire does not striking the fender. We basically inverse the BS so you do non need to use a spacer, you may nevertheless need to do very minimal pounding on the wheel well depending on the specific tire. Smaller tires than a 275 make fitting much easier.   Features: - xviii.5 pounds each. - Cast aluminum. - Sold each. - This is a milled cycle, this is not a painted wheel. - Center bore: 73.1MM - Street legal: VIA and JLL approved....

More details ➞

SUBARU, TOYOTA, FORD FOCUS 2005-2014 MUSTANG SHIFT KNOB BOOT Retainer ADAPTER FOR Transmission GEAR SHIFTER LEVER 12X1.25 MM Available IN Black OR SILVER // Role # SBA1225

$ 10.95

VMS Racing shift boot adapter in T-6061 billet aluminum that will fit most Subaru, Toyota, Ford Focus and 2005-2014 Mustang vehicles with manual transmissions. VMS Racing shift boot adapters are threaded to manufacturer standards for easy installation, no need for drilling or borer.               The thread of this shift boot adapter is 12x1.25 mm and might fit other brands of vehicles that take the same shift knob thread. Shift boot adapter is made to Work on Manual transmission vehicles Simply.              VMS Racing shift kicking adapters are manufactured of Shipping Quality T-6061 Billet Aluminum, and and then they are precision machined to exacting tolerances. After all the machining is done, the shift kicking adapter is beautifully difficult anodized, to ensure a long lasting finish, and to provide years of problem free service and looks.  Features: • Made of CNC machined T-6061 Billet Aluminum. • Straight commodities-on with no modifications required. • Will work on both 5 and half dozen speed transmissions. • Holds shifter kick up to let the employ of aftermarket shift knobs. • Easy 5 minute install....

More details ➞

VMS RACING RALLY STRIPE WITH FLAMING MUSTANG LOGO SHIFT KNOB six SPEED FOR 2015-2017 FORD MUSTANG FOCUS ST FIESTA ST with the recess for the opposite lockout

$ 38.95

This is the coolest looking (this affair looks awesome!) VMS Racing Rally WITH Flaming Mustang shift knob (flaming mustang is on both sides) Circular Ball manner vi speed spiral in shift knob for the 2015-2017 Ford Mustangs with the recess for the reverse lockout. Volition too fit the Ford Focus and Fiesta that are equipped with the contrary lockout shifter. VMS Racing shift knobs are threaded to manufacturer standards for piece of cake installation, no need for drilling or tapping. Installation will crave a pocket-sized amount of Loctite to secure the shift knob to the shifter. It is highly recommended that you use a Loctite agglutinative that is NOT permanent and so that the shift knob volition not be damaged if you lot need to remove information technology in the future. *** Will NOT FIT THE 2015-2017 MUSTANG SHELBY GT350 as they have a unlike thread on them! *** VMS Racing shift knobs are manufactured of Aircraft Quality T-6061 Billet Aluminum, and and so they are precision machined to exacting tolerances. After all the machining is done, the shift knob is finished using the latest in water transfer printing technology. Later on information technology is finished the clear coat is applied and polished to a high luster smooth to ensure a long lasting finish, and to provide years of trouble free service and looks. The color and lettering will not rub off or loose information technology shine. Look at the photos, finish looks like porcelain! Features: • Billet Aluminum with water transfer engineering, beautiful clear coated with UV protection. • Direct bolt-on with no modifications required. • Weighs vi ounces and measures 2 inches in bore. • Look at the photos, all-time quality available. • Easy to install....

More than details ➞

wilsondoomplast.blogspot.com

Source: https://www.vmsracing.com/collections/mustang

Share this post